SY16C-Tier 4F
  • SY16C-Tier 4F
  • SY16C-Tier 4F


5 ton Wheel Loader

Operating Weight:
Engine Power:
187 (251) kW (HP)
Bucket Capacity:
0,7 — 1,4 cubic meters
General information Manufacturer SANY Heavy Industry Co., Ltd. (SANY Group Co., Ltd.),
Model SANY SH350
Type The organization is as follows: grab excavator hydraulic boom (excavator grab on track) for the device of concreted walls in the ground
chassis Weight 30 t
Manufacturer chassis CAT 325D / CAT 329D
The manufacturer of the chassis Caterpillar, Inc.
Engine CAT C7 PHP (187 kW / 251 HP at 1800 rpm)
Length of track 5263 mm
Track height 949 mm
Caterpillar Shoe width 800 mm
Track width in working position (with extended sidewalls 4300 mm
Engine Engine manufacturer CATERPILLAR, Inc.
Environmental standards evro- 3
Number of cylinders 6
Cylinder diameter × piston stroke 110 × 127 mm
Working volume 7,2 L
Compression ratio 17:01:00
Rated motor power 187 (251) kW (HP)
Engine speed at rated power 1800 vol.\mine
Maximum torque 1274 n. m
Engine speed at maximum torque 1500 vol.\mine
The minimum specific fuel consumption at 100% rated power of the motor, 210 g / kW.h
main characteristic The trench width  300— 1200mm
Length of excavation at a time 2800 mm
The maximum depth of the trench 60 m
The volume of the grab 0,7 — 1,4 cubic meters
The grapple weight is 11.7 and 15.3 MT
The weight of a fully loaded grapple 13 — 18 t
Overall length in transport position 11680 mm
Overall width 3000 mm
Overall height 2400 mm
Total weight of 60 t
Performance The force of the cylinder 1032 (30) kN
The time of disclosure to grapple with the 6.0 c
Time and closing with a 6,4 c
Lifting speed of fully loaded grab 38 m / min
Empty grab lowering speed 35 m / min
Maximum rotation speed of the platform is 3 rpm.\mine
The maximum radius of reach 5 m
Hydraulic system Main pump + auxiliary pump (A4VG28) 2 + 1 pump
The hydraulic pressure of 34.3 Mpa
Operating pressure in continuous operation 32 Mpa
Winches of grab installation Lifting force of the main winch on the 1st layer 178 kN
The linear speed of the main winch 76 / 38 m/min
Grab pull-off force 350 kN
Lifting force of the winch of change of departure of an arrow on the 1st laye 80 KN